Canon ColorPASS-Z5000, Getting Started

Page: 51 / 130

29 Setting up PostScript printing with Windows NT 4.0 and/or Windows 2000
T
O SET UP
TCP/IP
AND
LPR
PRINTING FOR
W
INDOWS
NT 4.0:
1. Open the Properties dialog box for the ColorPASS, and click the Ports tab.
2. Click Add Port.
The available port types are displayed.
3. Select LPR Port and click New Port.
If the LPR port is not listed, install the TCP/IP network protocol and
Microsoft TCP/IP printing software. See the Configuration Guide or your Windows
documentation.
4. Enter the IP address of the ColorPASS.
If your network uses Domain Name Services (DNS), enter the DNS name assigned to
the ColorPASS instead of the IP address.
5. Press Tab and type one of the following names, depending on the ColorPASS
connection you would like to print to.
print
hold
N
OTE
:
This name is case-sensitive; type it exactly as shown above.