6
Basic Printing
To load envelopes:
To load envelopes:
To load envelopes:
To load envelopes:
1.
Lift the cover and set the paper thickness lever to the envelope mark. Close
the cover.
2.
Slide the paper feed guide to the left.
3.
Press down on the corners and sides
of the envelopes to make them as flat
as possible by expelling all of the air.
To avoid paper jams, make sure
envelopes are flat before you load
them into the paper tray.
4.
With the address side facing up and
pointed in the direction shown in the
illustration, align the stack with the
right side of the paper rest, then
insert the stack into the printer.
5.
Slide the paper guide to the edge of
the envelopes until it is firmly in
place.
Make sure that none of the flaps overlap. If the envelope edges
are not flat, crease them with the side of a pen.
Do not allow more than 10 envelopes to stack on the paper
output tray.
Flap side of envelope faces down
Summary of Contents for Color Bubble Jet S600
Page 4: ...ii Contents ...
