background image

Canon S600 Color Bubble Jet Printer Quick Start Guide. 

Copyright

Copyright

Copyright

Copyright

This manual is copyrighted by Canon U.S.A., Inc. with all rights reserved. Under the copyright laws, 
this manual may not be reproduced in any form, in whole or in part, without the prior written 
consent of Canon U.S.A., Inc.

© 2001 Canon U.S.A., Inc. 

Disclaimer

Disclaimer

Disclaimer

Disclaimer

Canon U.S.A., Inc. has reviewed this manual thoroughly in order that it will be an easy to use guide 
to your Canon S600 Color Bubble Jet Printer. All statements, technical information and 
recommendations in this manual and in any guides or related documents are believed reliable, but 
the accuracy and completeness thereof are not guaranteed or warranted, and they are not intended 
to be, nor should they be understood to be, representation or warranties concerning the products 
described.

Specifications are subject to change without notice.

All print speeds based on high-speed draft mode. Print speed will vary depending on system 
configuration, software, document complexity, print mode and page coverage.

As an 

E

NERGY 

S

TAR partner, Canon U.S.A., Inc., has determined that this product meets 

the 

E

NERGY 

S

TAR guidelines for energy efficiency. 

All information regarding non-Canon products was compiled from publicly available information. No 
representation is made regarding the accuracy thereof.

Trademarks

Trademarks

Trademarks

Trademarks

Canon and BJ are registered trademarks and Bubble Jet and S600 are trademarks of Canon Inc.

Canon U.S.A., Inc. 
2995 Redhill Avenue
Costa Mesa, CA 92626

Printed in the U.S.A. 

Part number Q30-3380-US1

Summary of Contents for Color Bubble Jet S600

















































Reviews: