Canon BJ-W9000, Service Manual

Page: 80 / 455

4.1.3 How to replace roll media
1) Pull out the roll media cassette until it moves no more.
2) Wind back the media, and then hold both ends of the spindle to remove it from the
roll cassette.
3) Pressing down the roll media locking lever, pull out the spindle from inside the
paper tube.
4) Prepare a new media roll.
5) Pressing down the roll media locking lever, slide the spindle into the media roll
until the edge of the core tube comes into contact with the stopper. Be sure to
orient the roll correctly, checking the rolling direction.
6) Attach the spindle, on which the roll media was installed, to the roll media cassette.
Part 3: Operations BJ-W9000
3-30
Roll media
Spindle
Roll media locking lever
Gear (white)
Roller (blue)
Groove
Gear (blue) Roller (blue)
Groove (blue)
Figure 3-26 Loading the Roll Media (2/5)
Spindle
Roll media locking lever
Figure 3-25 Loading the Roll Media (1/5)