Canon 2050C - DR - Document Scanner User Manual Download Page 23

Page: 23 / 103

Before Using the Scanner

Chapter 1

5. About the Setup Disc

The Canon DR-2050 series scanner setup disc contains the software listed
below:

• DR-2050C Driver

Scanner driver for use with the DR-2050C/DR-2050SP scanner, and the Job
Registration Tool.

• CapturePerfect 3.0

ISIS-compatible application developed for Canon document scanners.

Note

The following shows how the DR-2050 series setup disc is configured.
For instructions on how to install the software included on the setup disc, see
the Easy Start Guide.

Menu screen

Typical Installation

Read the manual

Custom Installation

* All of the indicated software is installed.

* Only the software selected in the

checkboxes is installed.

* The “Easy Start Guide”, “User’s Guide”

and “CapturePerfect 3.0 Operation
Guide” provided with the scanner.

Summary of Contents for 2050C - DR - Document Scanner








































































































Search results

Summary of Contents for 2050C - DR - Document Scanner

Reviews:

Related manuals for 2050C - DR - Document Scanner

Brands by name

Popular brands

Canon 2050C - DR - Document Scanner, User Manual

Search results

Summary of Contents for 2050C - DR - Document Scanner

Reviews:

Related manuals for 2050C - DR - Document Scanner

Brands by name

Popular brands