Canon 2050C - DR - Document Scanner User Manual Download Page 84

Page: 84 / 103

Appendices

4. Uninstalling Software

If the ISIS/TWAIN driver, “Job Registration Tool,” and “CapturePerfect 3.0”
are not operating normally, follow the procedure below to uninstall them.

Then, re-install the software from the DR-2050 series setup disc. (See “Step 3.
Installing the Software,” in the Easy Start Guide.)

IMPORTANT

Be sure to log on as an administrator when using Windows 2000 Professional
or Windows XP.

Click the [Start] button

click [Settings]

[Control Panel].

Note

For Windows XP, click the [Start] button

click [Control Panel].

The [Control Panel] window appears.

Double-click the [Add/Remove Programs].

Note

If you are using Windows XP, double-click the [Add or Remove Programs].

Summary of Contents for 2050C - DR - Document Scanner








































































































Search results

Summary of Contents for 2050C - DR - Document Scanner

Reviews:

Related manuals for 2050C - DR - Document Scanner

Brands by name

Popular brands

Canon 2050C - DR - Document Scanner, User Manual

Search results

Summary of Contents for 2050C - DR - Document Scanner

Reviews:

Related manuals for 2050C - DR - Document Scanner

Brands by name

Popular brands