Canon 2050C - DR - Document Scanner User Manual Download Page 20

Page: 20 / 103

Before Using the Scanner

Back/Left Side

CAUTION
Make sure that ventilation openings are not blocked. Blocked
openings can cause internal heat build up, creating the risk of fire.

Conventions

(ON)

(OFF)

USB Connector

Connect the included USB
cable or one that supports
Hi-Speed USB 2.0.

Power Connector

Connect the AC adapter that
is provided with the scanner.

Kensington Slot

Used for anti-theft measures.
Theft can be prevented by
attaching a chain, etc.

Ventilation
Openings

Power Switch

Turns the scanner
ON and OFF.

indicating page-by-page feeding
of document (Page Separation
mode).

indicating multi-page document
alignment.

indicating document setting
method (center position, front/
back, feed direction).

Summary of Contents for 2050C - DR - Document Scanner








































































































Search results

Summary of Contents for 2050C - DR - Document Scanner

Reviews:

Related manuals for 2050C - DR - Document Scanner

Brands by name

Popular brands

Canon 2050C - DR - Document Scanner, User Manual

Search results

Summary of Contents for 2050C - DR - Document Scanner

Reviews:

Related manuals for 2050C - DR - Document Scanner

Brands by name

Popular brands