Canon 1000S, Service Manual

Page: 300 / 840

4. MECHANICAL SYSTEM
4-46
COPYRIGHT © 2001 CANON INC. CANON CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)
7) Remove the screw [7], and remove the
transfer inlet paper guide [8]. 9) Push in the transfer unit assembly [11] toward
the rear until it hits the rear lightly; at this time,
take care not to force it farther than it moves.
Figure 4-415A
8) Remove the three screws [9], and remove the
transfer frame front support plate [10].
Figure 4-416A
Figure 4-417A
10) To protect the transfer belt [12], place A3
paper [13] as shown.
Figure 4-418A
[8]
[7]
[9]
[10] [9]
[11]
[12]
[13]