Canon 1000S, Service Manual

Page: 306 / 840

4. MECHANICAL SYSTEM
4-52
COPYRIGHT © 2001 CANON INC. CANON CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)
6) Remove the screw [4], and slide out the
internal static eliminating roller [5] by lifting it.
11. Cleaning the Grounding Roller
1) Remove the three screws, and remove the
grounding roller unit.
2) Clean the toner off the surface of the roller with
a blower brush, and dry wipe the roller with
lint-free paper.
12. Cleaning the Transfer Belt Seam
Detecting Sticker
1) Release the separation paper guide.
2) Turn the transfer belt drive roller [1] to move
the transfer belt [2] until the seam [3] is at the
top (as shown).
Figure 4-436A
10. Removing the Grounding Roller
1) Draw out the transfer unit.
2) Remove the three screws [1], and remove the
grounding roller unit [2].
Figure 4-437A
3) Remove the mounting screw [4], and remove
the roller fixing plate [3]; then, remove the
grounding roller [5].
Figure 4-438A
[5]
[4]
[1]
[2]
[3]
[4]
[5]
Figure 4-439A
[3]
[2]
[1]