Canon 1000S, Service Manual, Page: 332 / 840

4. MECHANICAL SYSTEM
4-78
COPYRIGHT © 2001 CANON INC. CANON CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)
VIII. CHARGING SYSTEM
A. Primary Charging
Assembly
1. Outline
The CLC1000's primary charging assembly
houses the pre-primary charging assembly.
2. Removing the Primary Charging
Assembly
1) Lift the hopper assembly.
2) Pull out the primary charging assembly.
3. Removing the Grid Plate
1) While pushing the knob [1], remove the grid
plate [2].
4. Removing the Primary Charging
Assembly Cleaning Pad
1) Remove the two screws [1], and remove the
shielding plate [2] from the primary charging
assembly.
Figure 4-801A
Do not clean the grid plate or the
primary charging wire. If images are
not even in density or faulty, replace
them.
Figure 4-802A
2) Pick the cleaning pad [3], and disengage the
hook [4].
Figure 4-803A
[2]
[1]
[2]
[1]
[1]
[3]
[4]
[4]