![background image](http://html1.mh-extra.com/html/campbell/et107/et107_product-manual_3806660092.webp)
Appendix C. PS24 24 Ah Power Supply and 10 x 12 inch Enclosure
C-7
6.
The bottom enclosure bracket has a small metal locking mechanism. Push
up on the small Phillips screw underneath the mechanism and slide it to the
left. Once in place, put a small wire tie in the hole to the right of the locking
mechanism (see FIGURE
).
To remove the enclosure from the bracketing, cut off the wire tie,
slide the lock to the right, and lift the entire enclosure off the
bracketing.
FIGURE C-8. Enclosure locking mechanism
NOTE