![background image](http://html1.mh-extra.com/html/campbell/et107/et107_product-manual_3806660047.webp)
ET107 Weather Station
38
FIGURE 5-27. Radio mounted in the ET107 (battery not shown)
4.
Connect the long 9-pin female end of the ribbon cable to the
CS I/O
port
on the radio.
5.
Screw the connector to the radio using the provided two screws (FIGURE
).
FIGURE 5-28. Attach ribbon cable to Radio CS I/O port
5.6.4.3 External Installation of the Radio
The antenna should have been ordered with the radio kit.
The following components are provided with the radio kit for antenna
installation on the ET107 pole:
(1) antenna cable, 59 inch
(1) adjustable angle antenna mounting bracket
(1) 5/16-18 x 2.125 stainless steel U-bolt
(1) CM230 saddle bracket
(4) silicon bronze 5/16-18 nuts
(4) 5/16 stainless steel washers
(4) 5/16 stainless steel lock washers
(4) 14.5-inch black UV resistant wire ties
Ribbon
Cable
Antenna Cable
Ribbon Cable