Appendix C. PS24 24 Ah Power Supply and 10 x 12 inch Enclosure
C-9
11.
Wire the charging source (solar panel or ac source) into the two
CHG
terminals on the CH150 or
CHARGE
terminals on the PS100 and PS150
TABLE C-1. Solar Panel or AC Connections
Solar Panel
or AC Wire Color
Power Supply
Connection Terminal
Red
CHG
or
CHARGE
Black
CHG
or
CHARGE
Polarity makes no difference. Connect one wire per CHG terminal
block.
12.
If the charging source is a solar panel, remove the blanket or box from the
solar panel once it’s wired into the CH150, PS100 or PS150 regulator.
The charging LED (steady red on the PS100, or flashing green on
the CH150 and PS150) indicates that the charging source (solar
panel or ac) is providing a charging voltage to the battery. The
battery will be charged regardless of the toggle switch position. The
switch on the regulator controls the voltage going to the terminal
blocks marked
+12V
on the PS100 and
12V
on the CH150 and
PS150.
NOTE
NOTE
