![background image](http://html1.mh-extra.com/html/campbell/et107/et107_product-manual_3806660028.webp)
ET107 Weather Station
19
4.
Attach the radiation shield to the underside of the crossarm using the two
knurled thumb screws from step 1.
5.
Plug cable into the
TEMP/RH
connector on the enclosure. Ensure that the
plug is completely seated on the connector and the locking ring is turned a
quarter revolution clockwise.
5.5.4 034B Wind Sensor (Wind Sensor Option –MW)
Do the following to install the 034B Wind Sensor after the crossarm is securely
installed (FIGURE
).
FIGURE 5-12. Wind and RH/temperature sensor installation
Temp/RH
Radiation Shield
Knurled Thumb
Mounting Screws