ET107 Weather Station
57
1.
Take the desiccant packs out of the plastic bag.
2.
Strap the packs into the desiccant holder inside the lid of the enclosure
using the two Velcro straps.
3.
Close the enclosure hasp securely. A padlock may be used on the latch for
extra security.
FIGURE 5-49. Desiccant installation
5.11 ET107 Software
The ET107 comes with a default program, and typically does not
require additional programming (Appendix
(p. E-1)
).
A variety of different software packages are available to work with the ET107
station. This section introduces software packages that can be used with the
ET107 station. It is not the goal to fully explain capabilities of each package.
All software packages mentioned below come with extensive help files.
Contact Campbell Scientific with questions and support. All software includes
installation instructions.
NOTE
Desiccant