ET107 Weather Station
34
FIGURE 5-25. Short-haul modem mounting and connection (battery
not shown)
1.
Mount the Rad / SC932C mounting bracket into the enclosure with the
three pre-threaded screws provided.
2.
Connect the Rad modem and SC932C.
3.
Strap them into the mounting bracket under the Velcro strap.
4.
Connect the SC932C 9-pin port to the internal enclosure
CS I/O
port with
the ribbon cable supplied with the enclosure (FIGURE
5.
Wire the Rad modem to the enclosure with the 12-inch patch cable. Match
wire labels to wiring panel labels on both the enclosure and the Rad
modem (+XMT to +XMT). A small screwdriver is provided with the
enclosure to access the Rad modem connections. Use the screwdriver to
press down on the lever arm.
Pressing too hard on the lever arm can cause it to
break!
WARNING
Rad Short
Haul Modem
SC932C
12-inch 4-Wire
Patch Cable
Ribbon Cable
