![background image](http://html1.mh-extra.com/html/campbell/et107/et107_product-manual_3806660055.webp)
ET107 Weather Station
46
Campbell Scientific recommends using either ac power or a
10-watt solar panel and the PS24 power supply. Refer to
PS24 24 Ah Power Supply and 10 x 12 inch
(p. C-1)
, for mounting options and information on the
PS24.
5.6.5.2 Antenna
Campbell Scientific recommends the 2 dBd 4G/3G Multiband Omnidirectional
Antenna for the cell modem in an ET107 station. This antenna is ideally suited
for use with 4G and 3G cellular gateways.
Mounting hardware that comes in the box with some antennas will
not be used. The cell phone kit provides the hardware needed to
mount the antenna to the ET107 pole.
5.6.5.3 Establishing Cellular Service and Configuring the Cellular Modem
To use a cellular modem, you must first establish cellular service. The modem
then needs to be activated and programmed for use with Campbell Scientific
equipment. Procedures for doing these tasks are provided in the cellular
modem manual.
Campbell Scientific recommends testing the modem in the office
(assuming there is cellular coverage) prior to installing it in the
field.
5.6.5.4 Internal Installation of the Cellular Modem
If the cellular phone accessory kit and cellular modem were
ordered with the ET107, skip this section and go directly to
External Installation of a Cellular Modem
(p. 48)
.
For installation inside the enclosure, the following components are provided in
the cell phone accessory kit:
(1) mounting bracket
(1) null modem cable
(1) 4-inch Velcro hook—used with the Velcro strap to secure the radio
(1) 12-inch coaxial cable with SMA-to-BNC connectors
NOTE
NOTE
NOTE
NOTE