DAVIS Vantage Pro2 Updater, Quick Start Manual

Page: 1 / 4

Connecting a Davis Vantage Pro 2 or Vue to Weather Underground Using a
Weatherlink IP Device
Complete installation of your weather station.
● Davis Support ​ installation diagrams and instructions
Connect the Weatherlink IP device to the ​ Vantage Vue ​ or ​ Vantage Pro 2
console.
Connect the Weatherlink IP to the Internet (plug it in to your router).
● Installation ​ diagram ​ for Vantage Pro 2.
● Installation ​ diagram ​ for Vantage Vue.
Create a free Weatherlink account at ​ www.weatherlink.com ​ .
Click the ​ Add Devices ​ button at the top right corner of the
Weatherlink website.
On the device menu, click the
​
Install
​
button in the
WeatherlinkIP section.
Enter your ​ Station Name ​ . Select the weather station ​ Model ​ . Identify your
Station Usage
​
. Enter your
​
Device ID
​
. Enter your device
​
Key
​
.
●
​
Both the Device ID (DID) and Key are found on the sticker attached to the Weatherlink IP device.
Confirm your station is communication with the Weatherlink website.
● Verify data appears on the website.
● Helpful Tip:
​
If no data appears, power cycle the display console after connecting the Weatherlink
IP device.