7.7.2 Validating CRVW3–RF407 radio connectivity
7.7.2.1 Configuring the baseRF407
7.7.2.2 Configuring the CRVW3–RF407
7.7.2.3 Using Device Configuration Utility to connect to the CRVW3–RF407 over
the radio
8.2 Connecting sensors to the CRVW3
8.3 Providing power to the CRVW3
8.3.1 Alkaline D cell option (–ALK)
8.3.2 Rechargeable battery option (–RC)
8.4 Humidity monitoring and control
8.5 Mounting the CRVW3 enclosure
8.6 Installing the CRVW3 antenna
8.7 Connecting the CRVW3 to earth ground
8.7.1 Electrostatic discharge protection
8.8 Validating and fine-tuning CRVW3 settings
8.8.1 Confirm CRVW3 sensor measurements
8.9 Validating CRVW3 radio operation
8.10 Sealing the CRVW3 enclosure
9.1 Physical connection to the base station
9.2 LoggerNet network map configuration
9.3 Connecting to CRVW3 stations
9.4 Setting up automatic data collection
10.1 CRVW3 maintenance with LoggerNet
10.1.3 Device settings adjustments
10.2 CRVW3 on-site maintenance visits
Table of Contents - ii