![background image](http://html1.mh-extra.com/html/campbell/crvw3/crvw3_product-manual_3055708071.webp)
12. The contents of the file will be processed, and
Device Configuration Utility
will display the
spectrum and time-series information as recorded by your remote CRVW3 station.
Interpret the information shown in this screen in the same way as when using the
Troubleshoot tab.
NOTE:
The Off Line Analysis tab is only available in
Device Configuration Utility
when
disconnected from the CRVW3.
Repeat this process for channels 2 and 3 individually, if applicable. Rename the various files as
needed to indicate the station and channel that they represent. It is recommended that some
TimeSeries.bin files be captured soon after the installation of a CRVW3 station so they can be
kept as baseline references that document how the sensor was operating at the time of
deployment.
10.1.3 Device settings adjustments
You can view and change the current settings on each CRVW3 device using Connect Screen. This
is possible even when connections are made remotely to the CRVW3 over radio links.
NOTE:
If a table, such as VW_Data, will be impacted by the change to the settings, pause the
monitoring of that table in the Table Monitor tab of Connect Screen. Click Stop to do this. It is
CRVW3 3-Channel Vibrating-Wire Data Logger
64