Campbell CR23X, Operator'S Manual, Page: 54 / 374

SECTION 2. INTERNAL DATA STORAGE
2-4
the Output Array equal to or just ahead of the
location entered. Whenever a location number
is displayed by using the "#" key, the
corresponding data point can be displayed by
pressing the "C" key.
The same element in the next Output Array with
the same ID can be displayed by hitting
# A
.
The same element in the previous array can be
displayed by hitting
# B . If the element is 1
(Array ID), then
# A
advances to the next
array and # B backs up to the previous
array. # 0 A backs up to the start of the
current array.
The keyboard commands used in the
7
Mode are summarized in Table 2.3-1.
Advancing the DPTR past the Data Storage
Pointer (DSP) displays the oldest data point.
Upon entering the
7 Mode, the oldest
Output Array can be accessed by pressing the
"A" key.
TABLE 2.3-1.
7
Mode Command
Summary
Key Action
A
Advance to next data point
B
Back-up to previous data point
#
Display location number of currently
displayed data point value
C
Display value of current location
# A
Advance to same element in next
Output Array with same ID
# B
Back-up to same element in
previous Output Array with same ID
# 0 A
Back-up to the start of the current
Final Data Storage Array
∗
Exit
7
Mode