manualshive.com logo in svg

Campbell CR23X, Operator'S Manual, Page: 344 / 374

Share
Download
Campbell CR23X Operator'S Manual Download Page 344

TD ADDENDUM—SECTION 11. OUTPUT PROCESSING INSTRUCTIONS

AD-11-2

records.  If 0 is entered, records will be
automatically allocated such that all automatic
tables will be filled at the same time.  If some
tables specify the number of records and some
tables are automatically allocated, the specified
records will be allocated first, and then the
remaining memory will be divided among the
automatically allocated tables such that they will
be filled at the same time.  The Star 9 mode gives
the size of all tables and the period (in days)
before any automatically allocated table fills.  If -x
is entered, the processed results are returned to
input locations.

Summary of Contents for CR23X























































































































































































































































































































































































Reviews:

No comments