Cambium Networks PMP 450 AP, Configuration Manual

Page: 161 / 649

Chapter 1: Configuration Configuring security
Page
1-133
Attribute Meaning
Authentication Mode Operators may use this field to select from among the following
authentication modes:
Authentication Required: the BHS requires to be authenticated.
Authentication Disabled: the BHM requires no BHS to authenticate. (Factory
default).
Authentication Key
128-bit Refer Table 40 Security attributes –450 Platform Family AP on page 1-126
for parameter details
24 Hour Encryption
Refresh Operators may use this field to select from among the following options:
Enabled: Allows BHS re-registration every 24 hours.
Disabled: Disables 24-hour encryption refresh.
This parameter is disabled by default.
Encryption Setting
Refer Table 40 Security attributes –450 Platform Family AP on page 1-126
for parameter details
BHS Display of BHM
Evaluation Data
Web, Telnet, FTP
Session Timeout
IP Access Control
Allowed Source IP 1 to
3
Web Access
SNMP
Telnet
FTP
TFTP
NTP Server
Site Information
viewable to Guest
Users
Refer Table 40 Security attributes –450 Platform Family AP on page 1-126
for parameter details
Site Name
Site Contact
Site Location
Enable Security
Banner during Login