manualshive.com logo in svg

Cambium Networks PMP 450 AP, Configuration Manual

The Cambium Networks PMP 450 AP is a cutting-edge wireless access point that enables seamless and high-speed connectivity. Unlock its full potential by accessing the detailed Installation Manual, available for free download at our website. This comprehensive manual provides step-by-step instructions for hassle-free setup and operation.

Share
Download
background image

Chapter 1:  Configuration 

Configuring cnMaestroTM Connectivity 

 

 

Page 

1-274

 

For more information on these tools please see  

http://community.cambiumnetworks.com/t5/cnMaestro/How-to-use-the-cnMaestro-Tools-for-
Troubleshooting-Device-or/m-p/54503#U54503

 

Zero Touch on boarding of the PMP SMs when the corresponding AP is on 

boarded 

First a link should be established between the PMP AP and SM either by configuring manually or using 
the ICC. Once the AP and SM link is established, the AP must be onboarded to cnMaestro™ using one of 
several ways detailed above under the Onboarding section. Once the AP is onboarded to cnMaestro™ 
Cloud or On premises cnMaestro™server, the SMs under the AP will automatically onboard to 
cnMaestro™ using a Zero touch token that is communicated between the AP and SMs. This is applicable 
to existing SMs registered to the AP as well as new SMs registering to the AP for the first time. The SMs 
appear on the onboarding queue of cnMaestro™ and the operator must “Approve” the devices in order 
to manage them. 

The following operations for PMP Devices are available on cnMaestro™: 

•

 

Monitor the device details in the Dashboard page by navigating to the Monitor >Dashboard menu 
and selecting the PMP AP/SM in the tree. 

•

 

Monitor notifications related to the PMP AP/SM by navigating to the Monitor >Notifications Menu 
and selecting the PMP AP/SM in the tree. 

•

 

Monitor device statistics on the statistics page by navigating to the Monitor >Statistics menu and 
selecting the PMP AP/SM in the tree, then selecting the PMP AP or PMP SM in the Device type 
dropdown. 

•

 

Monitor Performance graphs related to the PMP AP/SM by navigating to the Monitor >Performance 
menu and selecting the required performance graph (i.e Throughput, SMs, Modulation) and 
selecting the PMP AP/SM in the tree. 

•

 

Troubleshoot the device on the Troubleshooting page by navigating to the Monitor >Tools menu 
and selecting the PMP AP/SM in the tree.   

•

 

Configure the devices by navigating to the Configure >Devices menu and selecting the PMP AP/SM 
in the tree and selecting the config template that needs to be pushed to the device. Configuration 
templates need to be created before the configuration can be pushed to the device. The template 
can be created by copying the existing configuration from the view device configuration link 
provided in the same page and then modifying the template as needed and then pushing to the 
same device or other similar devices. Template needs to be properly reviewed for IP Address and 
other critical parameters to avoid stranding SMs (resulting in a truck roll) by pushing an incorrect 
configuration. Configuration templates can be created by navigating to the Configure->Templates 
page and selecting the PMP device type while creating the template. 

•

 

Once on 14.2.1, PMP devices can be upgraded to future supported versions from cnMaestro™ by 
navigating to the Operate > Software Update page and selecting the “PMP Sectors” option from 
the device type drop-down and the version to which the device needs to be upgraded. It is 
recommended to upgrade the AP first, then the SMs.  

•

 

PMP Device Inventory details can be reviewed by navigating to the Monitor >Inventory page. 

Summary of Contents for PMP 450 AP










































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for PMP 450 AP

WAGO 852-1417 Operating And Assembly Instructions preview
852-1417
Brand: WAGO Pages: 2
Winext GW5000A Manual preview
GW5000A
Brand: Winext Pages: 37
HARTING HAIIC MICA Hardware Development Manual preview
HAIIC MICA
Brand: HARTING Pages: 13
National Instruments NI-9206 Getting Started preview
NI-9206
Brand: National Instruments Pages: 8
Balluff Easy Tool-ID BSG TID-05-T30-00-005 Installation And Operation Manual preview
Easy Tool-ID BSG TID-05-T30-00-005
Brand: Balluff Pages: 46
MEMON memonizerWORKSTATION Quick Start Manual preview
memonizerWORKSTATION
Brand: MEMON Pages: 2
Eaton SONiX Pm10 Technical Manual preview
SONiX Pm10
Brand: Eaton Pages: 14
TRENDnet TEG-S51SFP Quick Installation Manual preview
TEG-S51SFP
Brand: TRENDnet Pages: 10
DIGIWEB Box 7360 Quick Setup Manual preview
Box 7360
Brand: DIGIWEB Pages: 16
ADDON ARM8100 Quick Installation Manual preview
ARM8100
Brand: ADDON Pages: 4
HMS Anybus AWB3000 Startup Manual preview
Anybus AWB3000
Brand: HMS Pages: 18
Draytek Vigor1000B Quick Start Manual preview
Vigor1000B
Brand: Draytek Pages: 17
Infoblox ND-2200 Installation Manual preview
ND-2200
Brand: Infoblox Pages: 44
Axis M31-L SERIES Installation Manual preview
M31-L SERIES
Brand: Axis Pages: 30
SMC Networks SMCGS10P-Smart Installation Manual preview
SMCGS10P-Smart
Brand: SMC Networks Pages: 68
Allied Telesis IS230-10GP Web User Manual preview
IS230-10GP
Brand: Allied Telesis Pages: 136
Multitech ROUTE FINDER RFIPSC-1 Quick Start Manual preview
ROUTE FINDER RFIPSC-1
Brand: Multitech Pages: 54
Bdcom GP3600-16 Hardware Installation Manual preview
GP3600-16
Brand: Bdcom Pages: 25

Brands by name

Popular brands

Load more brands