Chapter 1: Configuration
Upgrading the software version and using
CNUT
Page
1-71
Software dependencies for CNUT
CNUT functionality requires
•
one of the following operating systems
o
Windows® 2000
o
Windows Server 2003
o
Windows 7 and Windows 8
o
Windows XP or XP Professional
o
Red Hat Enterprise Linux (32-bit) Version 4 or 5
•
Java™ Runtime Version 2.0 or later (installed by the CNUT installation tool)
CNUT download
CNUT can be downloaded together with each system release that supports CNUT. Software for these
system releases is available from
https://www.cambiumnetworks.com/products/software-
tools/cambium-network-updater-tool/,
•
A
.zip
file for use without the CNUT application.
•
A
.pkg
file that the CNUT application can open.
Upgrading a module prior to deployment
To upgrade to a new software version, follow this:
Procedure 11 Upgrading a module prior to deployment
1
Go to the support website (see
on page
) and find Point-to-
Multipoint software updates. Download and save the required software image.
2
Start CNUT
3
If you don’t start up with a blank new network file in CNUT, then open a new network file with
the New Network Archive operation (located at File > New Network).
4
Enter a new network element to the empty network tree using the Add Elements to Network
Root operation (located at Edit > Add Elements to Network Root).
5
In the Add Elements dialogue, select a type of Access Point or Subscriber Module and enter
the IP address of 169.254.1.1.
6
Make sure that the proper Installation Package is active with the Package Manager dialogue
(located at Update > Manage Packages)
.
7
To verify connectivity with the radio, perform a Refresh, Discover Entire Network operation
(located at View > Refresh/Discover Entire Network). You must see the details columns for
the new element filled in with ESN and software version information.
8
Initiate the upgrade of the radio using Update Entire Network Root operation (located at
Update > Update Entire Network Root). When this operation finishes, the radio is done
being upgraded.
Summary of Contents for PMP 450 AP
