Chapter 1: Configuration
Configuring a RADIUS server
Page
1-278
Attribute
Meaning
Authentication Mode
Operators may use this field to select the following authentication modes:
Disabled—the AP requires no SMs to authenticate.
Authentication Server —the AP requires any SM that attempts registration
to be authenticated in Wireless Manager before registration.
AP PreShared Key - The AP acts as the authentication server to its SMs and
will make use of a user-configurable pre-shared authentication key. The
operator enters this key on both the AP and all SMs desired to register to
that AP. There is also an option of leaving the AP and SMs at their default
setting of using the “Default Key”. Due to the nature of the authentication
operation, if you want to set a specific authentication key, then you MUST
configure the key on all of the SMs and reboot them BEFORE enabling the
key and option on the AP. Otherwise, if you configure the AP first, none of
the SMs is able to register.
RADIUS AAA - When RADIUS AAA is selected, up to 3 Authentication
Server (RADIUS Server) IP addresses and Shared Secrets can be configured.
The IP address(s) configured here must match the IP address(s) of the
RADIUS server(s). The shared secret(s) configured here must match the
shared secret(s) configured in the RADIUS server(s). Servers 2 and 3 are
meant for backup and reliability, not for splitting the database. If Server 1
doesn’t respond, Server 2 is tried, and then server 3. If Server 1 rejects
authentication, the SM is denied entry to the network and does not progress
trying the other servers.
Authentication Server
DNS Usage
The management DNS domain name may be toggled such that the name of
the authentication server only needs to be specified and the DNS domain
name is automatically appended to that name.
Authentication Server
1
Enter the IP address or server name of the authentication server (RADIUS or
WM) and the Shared Secret configured in the authentication server. When
Authentication Mode RADIUS AAA is selected, the default value of Shared
Secret is “CanopySharedSecret”. The Shared Secret may consist of up to 32
ASCII characters.
Authentication Server
2
Authentication Server
3
Authentication Server
4 (BAM Only)
Authentication Server
5 (BAM Only)
Radius Port
This field allows the operator to configure a custom port for RADIUS server
communication. The default value is
1812
.
Authentication Key
The authentication key is a 32-character hexadecimal string used when
Authentication Mode is set to AP Pre-Shared Key. By default, this key is
set to 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF.
Summary of Contents for PMP 450 AP
