Chapter 1: Configuration
General configuration
Page
1-77
DHCP Server (Name
or IP Address)
The DHCP relay server may be either a DNS name or a static IP address in
dotted decimal notation. Additionally, the management DNS domain name
may be toggled such that the name of the DHCP relay server only needs to
be specified and the DNS domain name is automatically appended to that
name. The default DHCP relay server addresses are 255.255.255.255 with the
appending of the DNS domain name disabled.
Option 82 Circuit ID
This parameter specifies the Circuit ID for DHCP Relay Option 82 data.
Following wildcards are supported:
•
$apmac$ - AP MAC adddress in ascii format, no delimiters
•
$apmacbi$ - AP MAC address in hex format (6 bytes)
•
$smmac$ - SM MAC adddress in ascii format, no delimiters
•
$smmacbi$ - SM MAC address in hex format (6 bytes)
•
$apsn$ - AP Site Name (may be truncated to 32 chars)
•
$smsn$ - SM Site Name (may be truncated to 32 chars)
•
$smvid$ - SM Port VID in ascii format, leading 0 included, 4 chars long
•
$smvidbi$ - SM Port VID in hex format (2 bytes)
•
$smluid$ - SM LUID
Default value is $apmacbi$
Note: Overall expanded Option 82 data is limited to 255 bytes.
Option 82 Remote ID
This parameter specifies the Remote ID for DHCP Relay Option 82 data.
Following wildcards are supported:
•
$apmac$ - AP MAC adddress in ascii format, no delimiters
•
$apmacbi$ - AP MAC address in hex format (6 bytes)
•
$smmac$ - SM MAC adddress in ascii format, no delimiters
•
$smmacbi$ - SM MAC address in hex format (6 bytes)
•
$apsn$ - AP Site Name (may be truncated to 32 chars)
•
$smsn$ - SM Site Name (may be truncated to 32 chars)
•
$smvid$ - SM Port VID in ascii format, leading 0 included, 4 chars long
•
$smvidbi$ - SM Port VID in hex format (2 bytes)
•
$smluid$ - SM LUID
Default value is $smmacbi$
Note: Overall expanded Option 82 data is limited to 255 bytes.
Option 82 Vendor
Specific ID
This parameter specifies the Vendor Specific ID for DHCP Relay Option 82
data.
Following wildcards are supported:
•
$apmac$ - AP MAC adddress in ascii format, no delimiters
•
$apmacbi$ - AP MAC address in hex format (6 bytes)
•
$smmac$ - SM MAC adddress in ascii format, no delimiters
•
$smmacbi$ - SM MAC address in hex format (6 bytes)
Summary of Contents for PMP 450 AP
