GB
Page 8 / 64
CT,T, TP, Rev24 - Operating Instructions
THIS INSTRUCTION MANUAL IS THE PROPERTY
OF CALPEDA S.P.A. ANY REPRODUCTION, EVEN
IF PARTIAL, IS FORBIDDEN
1. GENERAL INFORMATION
Before using the product carefully read the information
contained in this instruction manual, the manual should
be kept for future reference.
Italian is the original language of this instruction
manual, this language is the reference language in
case of discrepancies in the translations.
This manual is part of the essential safety requirement
ΕΣΘ Ρust bά ΧάtΕόΣάΘ uΣtόΠ tίά ΥΧΤΘuΗt όs зΣΕΠΠγ Θά-
commissioned.
The customer, in case of loss, can request a copy
of the manual by contacting Calpeda S.p.A. or their
agent, specifying the type of product data shown on
the label of the machine (see 2.3 Marking)
AΣγ ΗίΕΣήάs, ΕΠtάΧΕtόΤΣs ΤΧ ΡΤΘόзΗΕtόΤΣs ΡΕΘά tΤ tίά
product or part of it, not authorized by the manufacturer,
will revoke the “CE declaration” and warranty.
This appliance should not be operated
by children younger than 8 years,
people with reduced physical, sensory
or mental capacities, or inexperienced
people who are not familiar with the
product, unless they are given close
supervision or instructions on how to
use it safely and are made aware by a
responsible person of the dangers its
use might entail.
Children must not play with the
appliance.
It is the user's responsibility to clean
and maintain the appliance. Children
should never clean or maintain it
unless they are given supervision.
Do not use in ponds, tanks or
swimming pools or where people may
enter or come into contact with the
water.
Read carefully the installation
section which sets forth:
-
The maximum permissible
structural working pressure
(chapter 3.1).
-
The type and section of the
power cable (chapter 6.5).
- The type of electrical protection
to be installed (chapter 6.5).
1.1. Symbols
To improve the understanding of the manual, below are
indicated the symbols used with the related meaning.
Information and warnings that must be
observed, otherwise there is a risk that the
machine could damage or compromise
personnel safety.
The failure to observe electrical information
and warnings, could damage the machine or
compromise personnel safety.
i
Notes and warnings for the correct management
of the machine and its parts.
OΥάΧΕtόΤΣs tίΕt ΗΤuΠΘ bά ΥάΧέΤΧΡάΘ bγ tίά зΣΕΠ
user. After carefully reading of the instructions,
is responsible for maintenance under normal
conditions. They are authorized to affect
standard maintenance operations.
Operations that must be performed by a
ΦuΕΠόзάΘ άΠάΗtΧόΗόΕΣ. SΥάΗόΕΠόδάΘ tάΗίΣόΗόΕΣ
authorised to affect all electrical operations
including maintenance. They are able to
operate with in the presence of high voltages.
Operations that must be done performed by
Ε ΦuΕΠόзάΘ tάΗίΣόΗόΕΣ. SΥάΗόΕΠόδάΘ tάΗίΣόΗόΕΣ
able to install the device, under normal
conditions, working during “maintenance”,
and allowed to do electrical and mechanical
interventions for maintenance. They must
be capable of executing simple electrical
and mechanical operations related to the
maintenance of the device.
Indicates that it is mandatory to use individual
protection devices.
OFF
Operations that must be done with the device
switched off and disconnected from the power
supply.
ON
Operations that must be done with the device
switched on.
SUMMARY
1.
GENERAL INFORMATION ............................. 8
2.
TECHNICAL DESCRIPTION .......................... 9
3.
TECHNICAL FEATURES ................................ 9
4. SAFETY .......................................................... 9
5.
TRANSPORTATION AND HANDLING ......... 10
6. INSTALLATION ............................................. 10
7.
STARTUP AND OPERATION ....................... 11
8. MAINTENANCE ............................................ 11
9. DISPOSAL .................................................... 12
10. SPARE PARTS ............................................. 12
11. ESIGNATION OF PARTS ............................. 12
12. TROUBLESHOOTING .................................. 13
Drawing for dismantling and assembly .................. 62
Declaration of conformity ....................................... 64
www.calpeda.su
www.calpeda.su
