Our Company ALWAYS takes the operator and his/her safety into consideration when
designing our machinery and we guard exposed moving parts for the operator’s
protection. However, some areas can NOT be guarded or shielded in order to assure
proper operation. Therefore, this Operator’s Manual, and Decals on the machine, warn of
further danger and should be read and observed closely.
ALWAYS keep this manual in a convenient place for instant reference and NEVER
make repairs or adjustments that you do not fully understand. If you require additional
information or service, contact you authorized CBC Dealer.
REMEMBER! It is the owner’s responsibility to communicate information on the safe
use and proper maintenance of this machine! This includes providing understandable
interpretation of these instructions for operators who are not fluent in reading English.
MANDATORY SAFETY SHUTDOWN PROCEDURE
BEFORE cleaning, adjusting, lubricating, or servicing the unit:
1.
Bring machine to full parking stop on level surface. Never park on a slope
or hillside.
2.
Fully retract left and right sprayb
ar
s, raise bar to travel position, and lock
in place.
3.
Place rotary control switch to “OFF”, turn maste
r
control switch off and
pu
sh
“E” stop button.
4.
Idle engine for gradual cooling.
5.
Turn the Starter Key Switch to OFF position and remove key. Take the
key with you for security reasons.
NOTEONLY when you have taken these precautions can you be sure it is
safe to proceed. Failure to follow the above procedure, could lead to death or
serious bodily injury.
ADDITIONAL SAFETY REMINDERS
USER/OPERATOR SAFETY PRACTICES as established by applicable industry
standards are included in this Operator’s Manual and are intended to promote SAFE
OPERATION of the machine.
These guidelines do not preclude the use of good judgment, care and common sense as
may be indicated by the particular job site work conditions.
It is essential that operators be physically and mentally free of mind altering drugs and
chemicals, and thoroughly trained in the safe operation of the machine. Such training
should be presented completely to all new operators and should not be condensed for
those claiming previous experience. Information on operator training is available from
several sources including the manufacturer.
Calder Brothers Corporation
Model: Precision Spray
Serial #
944-N-P2C---S-D00000 to Current
Page6
V2.2
