IV.
Shot- Rate Calibration:
measured and marked on a road surface. 1000 feet
b.
nce traveled setting as described in technician portion of manual.
d.
d gear for spreading product.
rker on the road surface at 0’
f.
f manual.
h.
is to calibrate asphalt pump on the unit. Use dip-stick on level
i.
easured area for specific distance.
ian portion of
a. A preset distance should be
is preferred.
Zero the dista
c. Turn all individual valve sections to the off position so that spray-bar display
reads 0’ (zero feet).
Begin travel in desire
e. Turn the spray toggle on when crossing the first ma
and turn spray toggle off when crossing the second marker at 1000’
If necessary adjust distance ratio as described in technician portion o
g. Repeat steps b-f until distance displayed by computer equals distance traveled
within 2%
Second step
ground to accurately measure tank contents.
Set desired shot rate and spray over a small m
j. Dip tank level again for accurate measure on contents used.
k. If necessary adjust asphalt pump ratio as described in technic
manual.
Calder Brothers Corporation
Model: Precision Spray
Serial #
944-N-P2C---S-D00000 to Current
Page36
V2.2
