CAKEWALK UA-1G, Owner'S Manual

Page: 14 / 64

14
Names of things and what they do
●
[INPUT MONITOR] Switch
These are miniature switches that you can move upward or downward when you want to change various settings.
This specifies whether the audio signal received at the GUITAR/MIC jack, the MIC
(PLUG-IN POWERED) / DIGITAL IN jack, and INPUT jacks will be output from the
PHONES/DIGITAL OUT jack and the OUTPUT jacks.
ONSwitch DownThe audio input signal will be output directly from the PHONES/DIGITAL OUT jack and the OUTPUT jacks.
* If the [REC SOURCE] switch (P.14) is set to DIGITAL , the PHONES/DIGITAL OUT jack
and OUTPUT jacks will output the audio that was received in digital form at the MIC
(PLUG-IN POWERED) / DIGITAL IN jack, regardless of the setting of this switch.
●
[REC SOURCE] Switch
This selects the audio input signal that will be sent via USB to your computer.
* If the [REC SOURCE] switch is set to DIGITAL and a digital audio signal is being
input to the MIC (PLUG-IN POWERED) / DIGITAL IN jack, it will not be possible to
play back audio data from your computer.
ON
Switch
Down The audio input signal will be output directly from the
PHONES/DIGITAL OUT jack and the OUTPUT jacks.
AUTO
(OFF)
Switch Up
Use this setting if you don’t want the audio input signal to
be output directly from the PHONES/DIGITAL OUT jack
and the OUTPUT jacks.
If you’re using ASIO 2.0 compatible software, you’ll be able
to switch the setting on/off from your software.
ANALOG
Switch
Down
The analog audio signal received from the GUITAR/MIC
jack, MIC (PLUG-IN POWERED) / DIGITAL IN jack, and INPUT
jacks will be sent to your computer.
DIGITAL Switch Up
The digital audio signal received from the MIC (PLUG-IN
POWERED) / DIGITAL IN jack will be sent to your computer.
* If no input signal is being received at the MIC (PLUG-IN
POWERED) / DIGITAL IN jack, the audio signal being
output from your computer via USB will pass through
the UA-1G and return to the computer.
UA-1G_e.book 14 ページ ２００８年１２月１０日 水曜日 午後２時５０分