Caen ELS EASY-DRIVER 0520, User Manual

Page: 42 / 58

EASY-DRIVER – User’s Manual
42
“MWSR” Command
The ‘MWSR’ command is used to set the value of the ramp slew rate:
#MWSR: value \r
where:
- value is the Slew Rate for the ramp [A/s].
The accepted slew rate values are in the range [0-1000]. The start-up slew rate
value is the one that is set in the EEPROM memory.
Example:
MWSR example:
MWSR:10.5 \r
#AK \r