EASY-DRIVER – User’s Manual
43
“MRP” Command
The ‘MRP\r’ command returns the value of the bulk power supply actual voltage,
i.e. DC Link, measured at the EASY-DRIVER module input terminals.
Replies from the power supply to this command are in the following format:
#MRP:
value
\r
where:
-
value
is the measured DC Link voltage [V].
This value is presented to the user only with 10 mV resolution.
The MRP command, being a reading command, returns a response in any module
condition.
Examples:
MRP example:
MRP
\r
#MRP:12.3
\r
