EASY-DRIVER – User’s Manual
13
Figure 4:
front panel indicators
2.
Installation
Please read carefully this general safety and installation information before using
the product.
2.1
Preparation for use
In order to be operational the power supply must be connected to an appropriate
AC source. The AC source voltage should be within the power supply specification. Do
not apply power before reading, Section 2.2, 2.3, 2.4, 2.5, 2.6 and 2.7.
Table 1 below, describes the basic setup procedure. Follow the instructions in the
sequence given to prepare the power supply for use.
Step
Checklist
Description
1
Initial inspection
Physical inspection of power supply
2
Mounting
Installing the power supply, ensuring proper ventilation
3
AC Input Power Connection
Connect the power supply to the AC source
5
Load connection
Wire size selection, Interlock
4
First switch-on
Switch-on checkout procedure
Table 1:
Installation checklist
2.2
Initial Inspection
Prior to shipment this power supply was inspected and found free of mechanical
or electrical defects. Upon unpacking of the power supply, inspect for any damage
which may have occurred in transit.
The inspection should confirm that there is no exterior damage to the power
supply such as broken switch or connectors and that the all panel and display are not
