EASY-DRIVER – User’s Manual
17
AC Source requirement
The EASY-DRIVER power supplies are designed for universal AC input range
since it can operate with voltage from 100V to 240V and input frequency ranging from
47 Hz to 63 Hz. Installation Category shall be
CAT II
so maximum impulse voltage on
the network mains must be below 2500 V.
AC Input Cord
All the EASY-DRIVER power supplies are directly shipped with the
corresponding power cord (suitable for the destination country of the purchase). Power
supply side connector is a standard IEC C13 plug. Current rating for the connector is 6
A (or 10 A). Wire size for detachable power supply cord, shall be at least 0.75 mm
2
.
Wire size for fix installation shall be at least 1 mm
2
.
There is a potential shock hazard if the power supply chassis
is not connected to an electrical safety ground via the safety
ground in the AC input connector!
WARNING
