EASY-DRIVER – User’s Manual
34
“MOFF” Command
The ‘MOFF\r’ command is intended to turn off the EASY-DRIVER output
driver, thus disabling the output current terminals.
The ‘MOFF\r’ command automatically sets a “disabling” signal for the H-Bridge
driver; possible voltage overshoots obtained from the energy stored by a large inductive
load is heavily limited by a clamp power circuit rated at 110 % of DC-Link voltage.
Replies from the EASY-DRIVER to a ‘MOFF\r’ command are in the form
‘#AK\r’.
Examples:
MOFF example when the EASY-DRIVER module is ON and sourcing current:
MOFF
\r
#AK
\r
MOFF example when the EASY-DRIVER module output is already disabled::
MOFF
\r
#AK
\r
