CAE Healthcare Vimedix Cardiac User Manual Download

Page: 262 / 480

Using the Ob/Gyn Ultrasound Simulator

Vimedix

™

236

To use the area measurement tool:

1. Select the tool by clicking the

Area Measurement

button.

2. On the Ultrasound display, left-click the mouse at any point on the

periphery of the area to be measured.

marker appears on the Ultrasound display in the place where the

mouse is clicked.

3. Using the mouse, trace the periphery of the area to be measured, returning

to the starting point where the

marker appears.

4. After tracing all the way back to the starting point, left-click the mouse.

The traced area is selected and the measurement is displayed in cm

The Ultrasound Display

An area measurement

Summary of Contents for Vimedix Cardiac
































































































































































































































































































































































































































































































Search results

Summary of Contents for Vimedix Cardiac

Reviews:

Related manuals for Vimedix Cardiac

Brands by name

Popular brands

CAE Healthcare Vimedix Cardiac, User Manual

Search results

Summary of Contents for Vimedix Cardiac

Reviews:

Related manuals for Vimedix Cardiac

Brands by name

Popular brands