Cadillac 2010 SRX, Owner'S Manual

Page: 21 / 470

Keys, Doors and Windows 1-15
Notice: If you open the liftgate
without checking for overhead
obstructions such as a garage
door, you could damage the
liftgate or the liftgate glass.
Always check to make sure the
area above and behind the liftgate
is clear before opening it.
Choose the power liftgate mode by
turning the dial on the switch until
the indicator lines up with the
desired position.
The three modes are:
MAX : The liftgate power opens to
the full open height.
3/4 : The liftgate power opens to a
reduced open height that can be set
by the vehicle operator in a range of
approximately 3/4 open to full open.
Use this setting to prevent the
liftgate from opening into overhead
obstructions such as a garage door
or roof mounted cargo during power
operation. The liftgate can still be
opened fully manually.
OFF: The liftgate only operates
manually in this position.
Manual operation of a liftgate that
also has power operation requires
more effort than with a standard
manual liftgate.
In either the MAX or the 3/4 mode,
the liftgate can be power opened
and closed by:
. Pressing
&
on the Remote
Keyless Entry (RKE) transmitter
until the liftgate starts moving.
See
Remote Keyless Entry
(RKE) System Operation on
page 1
‑ 3 .
. Pressing
&
on the center of
the mode switch, located on the
driver door.
. Pressing the touchpad switch on
the liftgate outside handle to
open the liftgate.
Press and release
&
on the
liftgate adjacent to the latch to close
the liftgate.
Pressing any liftgate button, or the
touchpad switch while the liftgate is
moving, stops it. Pressing the button
or RKE switch again reverses the
direction. There is a minimum
distance that the power liftgate must
already be open for the system to
hold it open. If movement is stopped
below that minimum, the liftgate
closes.
Do not force the liftgate open or
closed during a power cycle.