Cadillac 2010 SRX, Owner'S Manual

Page: 227 / 470

Infotainment System 6-61
Transferring a Call
Audio can be transferred between
the in
‐ vehicle Bluetooth system and
the cell phone.
To Transfer Audio to the Cell
Phone
During a call with the audio in the
vehicle:
1. Press
b g
. The system
responds “ Ready ” followed by
a tone.
2. Say “ Transfer Call. ” The system
responds “ Transferring call ” and
the audio transfers to the cell
phone.
To Transfer Audio to the In-Vehicle
Bluetooth System
The cell phone must be paired
and connected with the Bluetooth
system before a call can be
transferred. The connection
process can take up to two minutes
after the key is turned to ON/RUN or
ACC/ACCESSORY.
Press
b g
during a call with the
audio on the cell phone. If the audio
does not transfer to the vehicle,
use the audio transfer feature on
the cell phone. See the cell phone
manufactures guide for more
information.
Voice Pass-Thru
Voice Pass ‐ Thru allows access to
the voice recognition commands on
the cell phone. See the cell phone
manufacturers user guide to see if
the cell phone supports this feature.
To access contacts stored in the cell
phone:
1. Press
b
/
g
.
. For vehicles without a
navigation system, the
system responds
“ Ready ”
followed by a tone.
. For vehicles with a
navigation system, the
system responds with a
tone. After the tone say
“ Hands Free ” . The system
responds “ Ready ” followed
by a tone.
2. Say “ Bluetooth ” . The system
responds “ Bluetooth ready ”
followed by a tone.
3. Say “ Voice ” . The system
responds “ OK, accessing
<phone name> ” .
. The cell phone's normal
prompt messages will go
through its cycle according
to the phone's operating
instructions.