Cadillac 2010 SRX, Owner'S Manual

Page: 160 / 470

4-52 Instruments and Controls
If you live in Canada, or you are
having difficulty programming a gate
operator or garage door opener by
using the
“ Programming Universal
Home Remote ” procedures,
regardless of where you live,
replace Step 2 under
“ Programming
Universal Home Remote ” with the
following:
2. Continue to press and hold the
Universal Home Remote button
while you press and release every
two seconds (cycle) the hand-held
transmitter button until the
frequency signal has been
successfully accepted by the
Universal Home Remote. The
Universal Home Remote indicator
light will flash slowly at first and then
rapidly. Proceed with Step 3 under
“ Programming Universal Home
Remote ” to complete.
Universal Remote System
Operation
Using Universal Home Remote
Press and hold the appropriate
Universal Home Remote button
for at least half of a second. The
indicator light will come on while
the signal is being transmitted.
Erasing Universal Home
Remote Buttons
All programmed buttons should be
erased when the vehicle is sold or
the lease ends.
To erase all programmed buttons on
the Universal Home Remote device:
1. Press and hold down the
two outside buttons until the
indicator light begins to flash,
after 10 seconds.
2. Release both buttons.
Reprogramming a Single
Universal Home Remote
Button
To reprogram any of the three
Universal Home Remote buttons:
1. Press and hold the desired
Universal Home Remote button.
Do not release the button.
2. The indicator light will begin to
flash after 20 seconds. Without
releasing the button, proceed
with Step 1 of the section
“ Programming Universal Home
Remote ” .
If you have questions or need
help programming the Universal
Home Remote System,
call 1
‐ 800 ‐ 355 ‐ 3515 or go to
www.homelink.com. You may also
call the customer assistance phone
number under
Customer Assistance
Offices on page 12 ‑ 3 .