3-8
Storage
Storing the U-Rail Gate
Remove the gate from the U-Rail by
pressing the button and lifting
upward.
1. Lift the cargo management
system cover.
2. Release the cover from the prop
rod as described in previous
steps.
3. Insert the top of the gate into the
lower two clips (A).
4. Flip the bottom of the gate
up and insert into the upper
two clips (B).
Cargo Net
{
WARNING
Do not stack items higher than
the upper end of the cargo net or
hang anything from the net. Avoid
items that have sharp edges or
that apply excessive force to the
net. If items are not properly
stored, damage to the net could
occur and items can be thrown
about the vehicle. You or other
could be injured. Always store
items behind the net.
For vehicles equipped with a cargo
net, it can be used to store light
loads, keeping them from falling
over or being thrown into the cabin
during heavy braking.
The net should not be overloaded or
used to store heavy loads.
Summary of Contents for 2010 SRX
