Cadillac 2010 SRX, Owner'S Manual

Page: 240 / 470

7-2 Climate Controls
J. Recirculation
K. Outside Air
L. Rear Window Defogger
Automatic Operation
The system automatically controls
the fan speed, air delivery, air
conditioning and recirculation in
order to heat or cool the vehicle to
the desired temperature.
When the indicator light is on, the
system is in full automatic operation.
If the air delivery mode or fan
setting is manually adjusted, the
auto indicator turns off and displays
will show the selected settings.
To place the system in automatic
mode do the following:
1. Press AUTO.
2. Set the temperature. Allow the
system time to stabilize. Then
adjust the temperature as
needed for best comfort.
English units can be changed to
metric units through the Driver
Information Center (DIC). See
Vehicle Personalization on
page 4
‑ 41 .
Q
/
R
(Driver and Passenger
Temperature Control): The
temperature can be adjusted
separately for the driver and the
passenger. Press to increase or
decrease the temperature.
ZONE: Press to link all climate
zone settings to the driver settings.
The ZONE indicator light turns off.
When the passenger settings are
adjusted, the ZONE indicator light
is on.
Manual Operation
O
(Power): Press to turn the
climate control system on or off.
D C
(Fan Control): Press to
increase or decrease the fan speed.
Pressing either button cancels
automatic operation and the system
goes into manual mode. Press
AUTO to return to automatic
operation.
H G
(Air Delivery Mode Control):
Press to change the direction of the
airflow. The current mode appears
in the display screen. Changing the
mode cancels the automatic
operation and the system goes into
manual mode. Press AUTO to
return to automatic operation.
To change the current mode, select
one of the following:
Y
(Vent): Air is directed to the
instrument panel outlets.
\
(Bi-Level): Air is divided
between the instrument panel
outlets and the floor outlets.
C
(Tri ‐ Level): Air is divided
between the windshield, instrument
panel, and floor outlets.
[
(Floor): Air is directed to the
floor outlets.