manualshive.com logo in svg

Cadex C7200, User Manual, Page: 145 / 176

Share
Download
Cadex C7200 User Manual Download Page 145

 

By Detailed Message 

Detailed 

Message 

Code Reasons 

Solutions 

ADAPTER DATA 

INVALID

 

209 

Invalid value in selected C-
code. 
The C-code is not 
compatible with the 
firmware. 
There may be a defect with 
the adapter memory 
 

Delete and re-enter the C-
code reset the extended C-

code to default values. 
Contact Cadex to upgrade 
firmware. 

ADAPTER 

INSERTED

 

201 

Adapter is detected on a 
station. This message 

appears momentarily. 

If the message persists, Press 
Esc. 

ADAPTER NOT 

SET UP

 

208 

Adapter is not programmed 
with a C-code, or the C-

code is invalid.  

Delete and re-enter the C-
code. Contact Cadex to 

upgrade firmware. 

ADAPTER 

REMOVED

 

202 

Adapter is removed from a 

station.  

If message persists, press 

ESC

. 

ADAPTER SETUP 

UPDATED

 

206 

Cadex BatteryShop has 

updated C-code in the 
Battery Adapter. 

If message persists, press 

ESC

.

 

BAD ADAPTER

 210 The analyzer does not 

recognize adapter.  

Remove and re-insert the 
adapter.  
Delete and reenter the C-
code. 
Clean the adapter contacts. 
Contact Cadex to upgrade 
firmware. 
If message persists, replace 
adapter. 

 

 

129 

Summary of Contents for C7200

















































































































































































Reviews:

No comments