manualshive.com logo in svg

Cadex C7200, User Manual, Page: 127 / 176

Share
Download
Cadex C7200 User Manual Download Page 127

 

4. 

Power on the analyzer and release the 

MENU

 key

 

5. 

Allow the analyzer to complete bootup. The analyzer will enter a Test 
Mode during this sequence.

 

6. 

Power off the analyzer and then power it on as normal.

 

The parameters that are reset to their default values include: 

• 

OhmTest, Runtime, Self-Discharge, Life Cycle and custom programs. 

• 

Battery startup settings. 

• 

Key sound and alert sound. 

• 

USB port device. 

• 

Voltage display.

 

• 

Service counter (number of batteries serviced)

.

 

• 

The setting for the serial port device changes to B

ATTERY

S

HOP

.  

Cleaning the Analyzer 

 

Caution! Before cleaning, turn off the power and unplug the 

AC power cord. 

Clean the analyzer only with a damp cloth moistened with mild 

soap and water and allow to thoroughly dry.

 Do not allow any 

liquids to enter the analyzer case under any circumstances. 

 

 

111 

Summary of Contents for C7200

















































































































































































Reviews:

No comments