Cabletron Systems ATX, Reference Manual

Page: 192 / 252

Chapter 10: Cabletron MIB
10-52 ATX MIB Reference Guide
sfddiRbcErrCnts {sfddiEntry 7}
Counter Read-Only
The number of RBC errors (FIOM MIB only).
sfddiRbcErrValue {sfddiEntry 8}
Integer Read-Only
Detailed status of the last RBC error (FIOM MIB only).
sfddiTxAsync {sfddiEntry 9}
Integer Read-Write
Number of bytes to reserve in the DPC Buffer Memory for transmitting
asynchronous packets.
sfddiShortAddressing {sfddiEntry 10}
Boolean Read-Only
Whether any packets were received with 16 bit MAC addresses.
sfddiSmtConditions {sfddiEntry 11}
Integer Read-Write
SMT conditions which should be reported to the NMS via SNMP traps. Possible
values are any combination of the following bits:
0x00000001 RING, any change in the status of Ring_Op
0x00000002 CLAIM, receipt of My_Claim, Higher_Claim, or Lower_Claim
0x00000004 BEACON, receipt of My_Beacon or Other_Beacon
0x00000008 TVX, expiration of tvx
0x00000010 TRT, expiration of TRT and Late_ct non-zero
0x00000020 PHY-INVALID, receipt of PH_Invalid causing the receiver to
enter state R0; this bit indicates that the Link Error Rate
Threshold Test has failed, and one or more of the PHYs has been
removed from a link connection (the lem_reject_ct field within
the FDDI port’s status can be used by the NMS to determine
which links have failed)
0x00000040 RESET, receipt of MAC_reset causing the receiver to enter state
R0
0x00000080 OVERFLOW, overflow of frame_ct, error_ct, or lost_ct
0x00000100 DUP, receipt of a frame with the destination address equal to this
station’s individual address and the received A indicator set