Cabletron Systems ATX, Reference Manual

Page: 55 / 252

ATX MIB Reference Guide 4-1
CHAPTER 4
TOKEN RING MIB
The unit supports the Token Ring MIB as defined in IEEE 802.5 Token Ring MIB,
RFC 1231 (K. McCloghrie, editor) dated May 1991. Note that Reassignment of
Experimental MIBs to Standard MIBs, RFC 1239 (J. Reynolds, editor), dated
June 1991, has reassigned the Token Ring MIB from the experimental namespace
to the transmission namespace.
The MIB branch for reaching the Token Ring group is:
1.3.6.1.2.1.10.
4.1 TOKEN RING GROUP
dot5 {transmission 9}
4.1.1 Token Ring Interface Table
dot5Table {dot5 1}
Not-Accessible
This table contains Token Ring interface parameters and state variables, on entry
per 802.5 interface.
The entry instances correspond to the unit’s port numbers. For example, if the
unit’s 2nd port is 802.5, then both {ifIndex2} and {dot5IfIndex 2} contain the
value “2”. If the unit’s 2nd port is not 802.5, then referencing {dot5IfIndex 2}
should return noSuchName.
dot5Entry {dot5Table 1}
Not-Accessible
A list of Token Ring status and parameter values for an 802.5 interface.
dot5ifIndex {dot5Entry 1}
Integer Read-Only
The value of this object identifies the 802.5 interface for which this entry
contains management information. The value of this object for a particular
interface has the same value as the ifIndex object for the same interface.