Cabletron Systems ATX, Reference Manual

Page: 116 / 252

Chapter 8: PPP MIB
8-4 ATX MIB Reference Guide
pppLinkStatusLocalToRemoteACCompression {pppLinkStatusEntry 12}
Integer Read-only
Indicates whether the local PPP entity will use Address and Control Compression
when transmitting packets to the remote PPP entity. The value of this object is
meaningful only when the link has reached the open state (ifOperStatus is up).
• enabled (1) - supports ACC map compression
• disabled (2) - no support for ACC map compression
pppLinkStatusRemoteToLocalACCompression {pppLinkStatusEntry 13}
Integer Read-only
Indicates whether the remote PPP entity will use address and control
compression when transmitting packets to the local PPP entity. The value of this
object is meaningful only when the link has reached the open state (ifOperStatus
is up).
• enabled (1) - supports ACC map compression
• disabled (2) - no support for ACC map compression
pppLinkStatusTransmitFcsSize {pppLinkStatusEntry 14}
Integer Read-only
The size of the Frame Check Sequence (FCS) in bits that the local node will
generate when sending packets to the remote node. The value of this object is
meaningful only when the link has reached the open state (ifOperStatus is up). 16
bit FCS is the only FCS supported.
pppLinkStatusReceiveFcsSize {pppLinkStatusEntry 15}
Integer Read-only
The size of the Frame Check Sequence (FCS) in bits that the remote node will
generate when sending packets to the local node. The value of this object is
meaningful only when the link has reached the open state (ifOperStatus is up).
pppLinkConfigTable {pppLink 2}
Not-Accessible
A table containing the LCP configuration parameters for this PPP Link. These
variables represent the initial configuration of the PPP Link. The actual values of
the parameters may be changed when the Link is brought up via the LCP options
negotiation mechanism.