Cabletron Systems ATX, Reference Manual

Page: 193 / 252

ATX Group
ATX MIB Reference Guide 10-53
0x00000200 LOST, recognition that this station’s transmitted frame was lost in
the course of its circulation around the ring
0x00000400 RESTRICTED, any time the R_Flag goes from reset to set; usage
of this bit is reserved for future applications
0x00000800 CONGESTION, any time this station sets Ax but does not set Cx.
0x00001000 TOKEN, receipt of a token if the MAC transmitter is in state T2
(transmitting data) or T3 (issuing token); usage of this bit is
reserved for future applications
0x00002000 T4, expiration of TRT in MAC transmitter state T4 (claiming) or
T5 (beaconing); usage of this bit is reserved for future
applications
sfddiSrfConditions {sfddiEntry 12}
Integer Read-Write
SRF conditions which should be reported to the NMS via SNMP Traps. For those
SRF policies which are optional (i.e., SRF_NOT_COPIED, SRF_EB_ERROR,
and SRF_TRACE), the setting of a bit also indicates that the policy is to be
implemented. Possible values include any combination of the following bits:
0x00000001 SRF-FRAME-ERROR, the MAC frame error rate exceeded the
threshold rate.
0x00000002 SRF-PORT-LER, a port’s LER Alarm has been triggered.
0x00000004 SRF-NOT-COPIED, the MAC frame not copied rate exceeded
the threshold rate.
0x00000008 SRF-DUP-ADDR, a duplicate address condition has been
detected.
0x00000010 SRF-EB-ERROR, an elasticity buffer error has occurred.
0x00000020 SRF-CONFIG, obsolete
0x00000040 SRF-CONNECT, an undesirable or illegal connection has been
attempted.
0x00000080 SRF-TRACE, obsolete
0x00000100 SRF-NEIGHBOR, a MAC neighbor has changed.
0x00000400 SRF-PEER-WRAP, the station is wrapped with a peer mode
connection.
0x00000800 SRF-PATH-CHANGE, the MAC path or a port path has changed.