Cabletron Systems ATX, Reference Manual

Page: 135 / 252

RTMP Group
ATX MIB Reference Guide 9-9
rtmpRangeStart {rtmpEntry 1}
Octet StringRead-Write
The first DDP network address in the network range to which this routing entry
pertains. This is a two octet DDP network address in network byte order.
rtmpRangeEnd {rtmpEntry 2}
Octet String Read-Write
The last DDP network address in the network range to which this routing entry
pertains. This is a two octet DDP network address in network byte order. If the
network to which this routing entry pertains is a Phase 1 network or a
non-extended network, the value for rtmpRangeEnd shall be two octets of zero.
rtmpNextHop {rtmpEntry 3}
Octet String Read-Write
The next hop in the route to this entry’s destination network. If the type of this
route is Appletalk, this address takes the same form as DdpAddress.
rtmpType {rtmpEntry 4}
Integer Read-Write
The type of network over which this route points.
rtmpPort {rtmpEntry 5}
Integer Read-Write
The index of the AppleTalk port over which this route points.
rtmpHops {rtmpEntry 6}
Integer Read-Write
The number of hops required to reach the destination network to which this
routing entry pertains.
rtmpState {rtmpEntry 7}
Integer Read-Write
The status of the information contained in this route entry. Setting this object to
the value bad (4) has the effect of invalidating the corresponding entry in the
rtmpTable. That is, it effectively disassociates the mapping identified with said
entry. It is an implementation-specific matter as to whether the agent removes an
invalidated entry from the table. Accordingly, management stations must be
prepared to receive from agents tabular information corresponding to entries not
currently in use. Proper interpretation of such entries requires examination of the
relevant rtmpState object.