Cabletron Systems ATX, Reference Manual

Page: 58 / 252

Chapter 4: Token Ring MIB
4-4 ATX MIB Reference Guide
dot5Functional {dot5Entry 9}
MacAddress Read-Write
The bit mask of all Token Ring functional addresses for which this interface will
accept frames.
4.1.2 Token Ring Statistics Table
dot5StatsTable {dot5 2}
Not-Accessible
A table containing Token Ring statistics, one entry per 802.5 interface. All the
statistics are defined using the syntax Counter as 32 bit wrap around counters.
The entry instances correspond to the unit’s port numbers. For example, if the
unit’s 2nd port is 802.5, then both {ifIndex 2} and {dot5StatsIfIndex 2} contain
the value “2”. If the unit’s 2nd port is not 802.5, then referencing
{dot5StatsIfIndex 2} should return noSuchName.
dot5StatsEntry {dot5StatsTable 1}
Not-Accessible
An entry contains the 802.5 statistics for a particular interface.
dot5StatsIfIndex {dot5StatsEntry 1}
Integer Read-Only
The value of this object identifies the 802.5 interface for which this entry
contains management information. The value of this object for a particular
interface has the same value as the ifIndex object for the same interface.
dot5StatsLineErrors {dot5StatsEntry 2}
Counter Read-Only
This counter is incremented when a frame or token is copied or repeated by a
station, the E bit is zero in the frame or token and one of the following conditions
exists: 1) there is a non-data bit (J or K bit) between the SD and the ED of the
frame or token, or 2) there is an FCS error in the frame.
dot5StatusBurstErrors {dot5StatsEntry 3}
Counter Read-Only
This counter is incremented when a station detects the absence of transitions for
five half-bit timers (burst-five errors).